TLK2711AIRCP

Product Summary

The TLK2711AIRCP is a multigigabit transceiver, intended for use in ultrahigh-speed bidirectional point-to-point data transmission systems. The TLK2711AIRCP supports an effective serial interface speed of 1.6 Gbps to 2.7 Gbps, providing up to 2.16 Gbps of data bandwidth. The primary application of this chip is to provide very high-speed I/O data channels for point-to-point baseband data transmission over controlled impedance media of approximately 50Ω. The transmission media can be printed-circuit board, copper cables, or fiber-optic cable. The maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Parametrics

TLK2711AIRCP absolute maximum ratings: (1)Supply voltage, VDD (see Note 1): -0.3 to 3 V; (2)Voltage range at TXD, ENABLE, GTX_CLK, TKLMSB, TKLLSB, LOOPEN, PRBS_PASS: -0.3 to 4 V; (3)Voltage range at any other terminal except above: -0.3 to VDD+0.3 V; (4)Package power dissipation, PD: See Dissipation Rating Table; (5)Storage temperature, Tstg: -65℃ to 150℃; (6)Electrostatic discharge: HBM: 2 kV, CDM: 1 kV; (7)Characterized free-air operating temperature range, TA: -40℃ to 85℃; (8)Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: 260℃.

Features

TLK2711AIRCP features: (1)1.6 to 2.7 Gigabits Per Second (Gbps) Serializer/Deserializer; (2)On-Chip PLL Provides Clock Synthesis From Low-Speed Reference; (3)Receiver Differential Input Thresholds 200 mV Minimum; (4)Hot-Plug Protection ; (5)High-Performance 80-Pin BGA Microstar Junior Package (GQE); (6)Low Power: < 500 mW; (7)3 V Tolerance on Parallel Data Input Signals; (8)2.5-V Power Supply for Low Power Operation; (9)16-Bit Parallel TTL Compatible Data Interface; (10)Programmable Preemphasis Levels on Serial Output; (11)Ideal for High-Speed Backplane Interconnect and Point-to-Point Data Link; (12)Interfaces to Backplane, Copper Cables, or Optical Converters; (13)Industrial Temperature Range (-40℃ to 85℃ RCP Package Only); (14)On-Chip 8-bit/10-bit Encoding/Decoding, Comma Detect; (15)Loss of Signal (LOS) Detection; (16)Integrated 50-ΩTermination Resistors on RX.

Diagrams