TLK2701IRCP

Product Summary

The TLK2701IRCP is a multigigabit transceiver, intended for use in ultrahigh-speed bidirectional point-to-point data transmission systems. The TLK2701IRCP supports an effective serial interface speed of 1.6 Gbps to 2.7 Gbps, providing up to 2.16 Gbps of data bandwidth. The primary application of this chip is to provide very high-speed I/O data channels for point-to-point baseband data transmission over controlled impedance media of approximately 50 Ω. The transmission media can be printed-circuit board, copper cables, or fiber-optic cable. The maximum rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Parametrics

TLK2701IRCP absolute maximum ratings: (1)Supply voltage, VDD (see Note 1): -0.3 to 3 V; (2)Voltage range at TXD, ENABLE, GTX_CLK, TKLMSB, TKLLSB, LOOPEN, PRBS_PASS: -0.3 to 4 V; (3)Voltage range at any other terminal except above: -0.3 to VDD+0.3 V; (4)Package power dissipation, PD: See Dissipation Rating Table; (5)Storage temperature, Tstg: -65℃ to 150℃; (6)Electrostatic discharge: HBM: 2 kV, CDM: 1 kV; (7)Characterized free-air operating temperature range, TA: -40℃ to 85℃; (8)Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: 260℃.

Features

TLK2701IRCP features: (1)1.6 to 2.7 Gigabits Per Second (Gbps) Serializer/Deserializer; (2)Hot-Plug Protection; (3)High-Performance 64-Pin VQFP Thermally Enhanced Package (PowerPAD.); (4)2.5-V Power Supply for Low Power Operation; (5)Programmable Voltage Output Swing on Serial Output; (6)Interfaces to Backplane, Copper Cables, or Optical Converters; (7)On-Chip 8-Bit/10-Bit Encoding/Decoding, Comma Detect; (8)On-Chip PLL Provides Clock Synthesis From Low-Speed Reference; (9)Receiver Differential Input Thresholds 200 mV Minimum; (10)Low Power: < 500 mW; (11)3 V Tolerance on Parallel Data Input Signals; (12)16-Bit Parallel TTL Compatible Data Interface; (13)Ideal for High-Speed Backplane, Interconnect and Point-to-Point Data Link; (14)Industrial Temperature Range (-40℃ to 85℃); (15)Loss of Signal (LOS) Detection.

Diagrams