SN65LVDS96DGG

Product Summary

The SN65LVDS96DGG is a LVDS serdes receiver.It contains three serial-in 7-bit parallel-out shift registers, a 7× clock synthesizer, and four low-voltage differential signaling (LVDS) line receivers in a single integrated circuit. These functions of the SN65LVDS96DGG allow receipt of synchronous data from a compatible transmitter, such as the SN65LVDS95, over four balanced-pair conductors and expansion to 21 bits of single-ended LVTTL synchronous data at a lower transfer rate. The SN65LVDS96DGG is characterized for operation over ambient air temperatures of –40 to 85℃.

Parametrics

SN65LVDS96DGG absolute maximum ratings: (1)Supply voltage range, VCC (see Note 1):–0.5 V to 4 V; (2)Voltage range at any terminal (except SHTDN):–0.5 V to VCC + 0.5 V; (3)Voltage range at SHTDN terminal:–0.5 V to 5.5 V; (4)Electrostatic discharge (see Note 2): Bus pins (Class 3A):4KV; (5)Bus pins (Class 2B): 200V; (6)All pins (Class 3A): 3 KV; (7)All pins (Class 2B): 200 V; (8)Continuous total power dissipation: (see Dissipation Rating Table); (9)Operating free-air temperature range, TA:–40 to 85℃; (10)Storage temperature range, Tstg: –65 to 150℃; (11)Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: 260℃.

Features

SN65LVDS96DGG features: (1)3:21 Data Channel Expansion at up to 1.3 Gigabits per Second Throughput; (2)Suited for Point-to-Point Subsystem Communication With Very Low EMI; (3)3 Data Channels and Clock Low-Voltage Differential Channels in and 21 Data and Clock Low-Voltage TTL Channels Out; (4)Operates From a Single 3.3-V Supply and 250mW (Typ); (5)5-V Tolerant SHTDN Input; (6)Rising Clock Edge Triggered Outputs; (7)Bus Pins Tolerate 4-kV HBM ESD; (8)Packaged in Thin Shrink Small-Outline Package With 20 Mil Terminal Pitch; (9)Consumes ＜1mW When Disabled; (10)Wide Phase-Lock Input Frequency Range 20 MHz to 67 MHz; (11)No External Components Required for PLL; (12)Inputs Meet or Exceed the Requirements of ANSI EIA/TIA-644 Standard; (13)Industrial Temperature Qualified TA = -40 to 85℃; (14)Replacement for the DS90CR216.

Diagrams